- 26-gauge pre-painted steel exterior and interior
- Triple Pane Glass Door with TPE, Magnetic, Positive-Seal Gasket – Self-Closing
- Top-Mounted Refrigeration System with Low Global Warming Potential – EPA Compliant
- Aluminum Fin/Copper Tube Evaporator with Capillary Tube
- Ecomate® foamed-in-place insulation: VOC-compliant, EPA Approved, No Ozone Depletion, No Global Warming, Environmentally Friendly, Thermally Efficient
- ETL Electrical Safety Listed (in accordance to UL471 Standard – 10th Edition)
- (Electronic Control System Gives Service Friendly Fault Codes
- Electric Automatic Defrost System
- Electric Condensation Pan
- Floor Racks
- Solid Injection Molded Feet
Model 750ADG
Indoor, Auto Defrost, Upright, Double Glass-Doors Ice Merchandiser
Polar Temp’s Model 750ADG keeps your product at just the right temperature year-round in the harshest of environments. Its robust and efficient 1/3 horsepower refrigeration system uses environmentally friendly R-448A as its refrigerant. R-448A reduces the potential for global warming by almost two-thirds and is approved for use in all fifty states.
The Ceram-A-Star® high-performance white finish is superior in both scratch and weather resistance, keeping maintenance costs low and your merchandiser looking new for many years to come.
With 3 inches of insulation in the top and bottom of all merchandisers, Polar Temp Ice Merchandisers are some of the best insulated in the industry. Ecomate® foam-in-place insulation is EPA-approved, has no ozone depletion potential, and is thermally-efficient, keeping your operating cost to a minimum.
The two large, rugged, triple pane, heat reflective, glass doors show case your product while providing an unsurpassed level of energy efficiency. The two magnetic gaskets create a positive seal, keeping the cold in and your product fresh and appealing much longer.
Model Number 750ADG
Model 750ADG Specifications
Dimensions & Weight
| Width | 70.25 inches |
| Depth1 | 35 inches |
| Exterior Height2 | 79 inches |
| Door Width | 26.75 inches |
| Door Height | 44.75 inches |
| Door Opening Width | 23.25 inches |
| Door Opening Height | 41.25 inches |
| Crated Weight | 520 lbs |
| Uncrated Weight | 380 lbs |
Capacity
| Interior Volume | 64 cubic inches |
| 20 lb Bag Capacity3 | 89 bags |
| 8 lb Bag Capacity3 | 230 |
Style
| Merchandiser Type | Indoor |
| Merchandiser Style | Upright |
| Door Style | Swing |
| Door Type | Glass |
| Number of Doors | 2 |
Electrical
| Voltage4 | 115 volts |
| Hertz | 60 hertz |
| Phase | Single phase |
Refrigeration
| Refrigeration Type | Automatic Defrost |
| Temperature Range | 10 - 20° F |
| Compressor Location | Top Mounted |
Certifications
| DOE Compliant5 | Yes |
| ETL Listed6 | Yes |
| ETL Sanitation Listed7 | Optional |
-
For depth measurements of indoor, upright style merchandisers, add 3.5" for the glass door and handle. For depth measurements of outdoor, upright style merchandisers, add 3.5" for the rain guard. For depth measurements of slant-front style merchandisers, add 1'' for the solid door and handle. For depth measurements of auto defrost models with an electric condensation pan, add 5.25".
-
The height measurement is inclusive of the hood (compressor)
-
Bag Capacity was calculated by measuring up to the "Fill Line" in Auto Defrost Merchandisers (the area above the Fill Line contains the evaporator and room around the evaporator that is necessary for air circulation). Cold Wall Merchandisers do not have an evaporator or a Fill Line, and thus the entire interior of these merchandisers can be used for ice storage. Calculations account for decreased room due to slant in slant-front merchandisers. Ice bag capacity is approximate. The method and location of bag tie-off, as well as the type and size of ice used, can affect bag capacity.
-
15-amp circuit required for each model
-
DOE Compliant - meets U.S. Department of Energy standards
-
ETL Listed - meets electrical safety standards in accordance to UL 471, 10th Edition
-
ETL Sanitation Listed - meets sanitation standards in accordance to NSF 7
